-
Summary： Working principle  The air which is drawn by air blower through the bottom after heating up passes through net board of material hopper. Inside the chamber, the air becomes state of flow under agitating and negative pressure. The moisture…
-
Summary： Main features1. The heat source can be steam, electricity, far infrared, or steam+electricity. Customer can select one of the heating ways in accordance with practical conditions;2.The temperature of operation: 50 ~ 140 C for steam, Maximum temperature wil…
-
Summary： Product introductionThe machine adopts full sealing for it . All parts are made of stainless steel. It is equipped with three grades of filter. The filtered air is one hundred thousand grades. The cooling device of wall is installed at the cylinder body. I…
-
Summary： Product introduction According to the requirements of the process, the pressure, the flow rate and the size of the spray hole can be adjusted to obtain the required spherical particles according to a certain size.Working principle The working pro…
-
Summary： Working principleThe so-called vacuum drying, that is, drying materials under vacuum conditions for heating drying. If the vacuum pump is used for pumping and exhausting, the drying speed is accelerated.Note: if the condenser is used, the solvent in the ma…
-
Summary： Working principleThe so-called vacuum drying, that is, drying materials under vacuum conditions for heating drying. If the vacuum pump is used for pumping and exhausting, the drying speed is accelerated.Note: if the condenser is used, the solvent in the ma…
Total 24 records, Show 19 - 24, Page 4/4
簡體中文
English
Espa?ol
Русский
Ti?ng Vi?t